Rubbermaid 5L40 User Manual

Rubbermaid
Congratulations and thank you for purchasing a Rubbermaid storage building.
BEFORE YOU BEGIN - BUILDING CODES
Be sure to check your focal building codes, ordinances and restrictions, and applicable neighborhood governances.
BEFORE YOU BEGIN -- SURFACE PREPARATION
To ensure proper assembly and performance your shed needs to be built on a solid, level surface.
А concrete or patio surface, ог a treated-wood platform is recommended.
BEFORE YOU BEGIN — LOCATION
When choosing a location in your yard make sure you choose an area with easy access and one that provides proper
drainage for water to run away from the shed.
BEFORE YOU BEGIN - PREASSEMBLY
Thoroughly review all assembly steps: it is important that the steps are followed in the correct order.
Review the parts list and make sure that no parts are missing.
IMPORTANT - DO NOT
RETURN TO THE STORE
For assistance with your Rubbermaid Storage ። ።ተ -
Building or for additional product information call =
our toll-free Consumer Service Number:
1-888-895-2110 M-F; 8:30 am - 5:00 pm EST,
or visit us online at www.rubbermaid.com
Installation Steps:
1. Site Preparation
2.
Floor
‚
7
3. Walls and Doors
78%"
4. Roof and Doors
5, Finishing
Note: Be sure to keep this instruction manual апа your original store receipt tó ensure aur Consumer Service
Department can accurately and quickly assist you if necessary. PKA 1612421

Rubbermaid 5L40 Specifications

General

Brand	Rubbermaid
Model	5L40
Category	Outdoor Storage
Language	English

Summary

Introduction and Preparation

Building Codes & Location

Check local building codes and select a suitable site with good drainage.

Surface Preparation

Ensure assembly on a solid, level surface like concrete or a treated-wood platform.

Preassembly & Support

Review assembly steps/parts and note customer support contact information.

Preassembly and Parts

Preassembly Steps & Tips

Review assembly steps, use detergent for easier engagement, and check the parts list.

Required Tools

List of essential tools needed for assembling the storage building.

Parts Identification

Comprehensive list of all parts with part numbers, assembly letters, and quantities.

Site Preparation and Cautions

Site Preparation Guidelines

Build a solid, level surface for the shed foundation, consulting local authorities.

Assembly Cautions & Care

Warnings for assembly and instructions for shed care and use.

Assembly Process

Floor Installation

Prepare and connect floor panels, ensuring proper alignment and securing with screws.

Wall Panels Installation

Install back, front left, and front right wall panels, connecting them to the floor and each other.

Gable and Roof Assembly

Assemble gable panels, attach to the back wall, and construct the back and front roof sections.

Front Truss and Door Installation

Install front roof supports, collar tie, rollers, and doors for structural integrity.

Finishing and Safety

Fasten walls, install brackets/bolts, and review maintenance and safety guidelines.