Rubbermaid 5L30 User Manual

Congratulations and thank you for purchasing a Rubbermaid storage building.
BEFORE YOU BEGIN – BUILDING CODES
Be sure to check your local building codes, ordinances and restrictions, and applicable neighborhood governances.
BEFORE YOU BEGIN – SURFACE PREPARATION
To ensure proper assembly and performance your shed needs to be built on a solid, level surface.
A concrete or patio surface, or a treated-wood platform is recommended.
BEFORE YOU BEGIN – LOCATION
When choosing a location in your yard make sure you choose an area with easy access and one that provides proper
drainage for water to run away from the shed location.
BEFORE YOU BEGIN – PREASSEMBLY
Thoroughly review all assembly steps (it is important that the steps are followed in the correct order).
Review the parts list and make sure that no parts are missing.
IMPORTANT – DO NOT
RETURN TO THE STORE
For assistance with your Rubbermaid
Storage Building or for additional
product information call our toll-free
Consumer Service number:
1-888-895-2110
M–F: 8:30 a.m. to 5:00 p.m. EST
or visit us online at:
www.rubbermaid.com.
Installation Steps:
1. Site Preparation
2. Floor
3. Walls
4. Roof & Doors
5. Finishing
5L30
76 ¾"
75 ½"
55 ¼"
1780070
Note: Be sure to keep this instruction manual and your original store receipt to ensure our Consumer Service
Department can accurately and quickly assist you if necessary.

Rubbermaid 5L30 Specifications

General

Brand	Rubbermaid
Model	5L30
Category	Outdoor Storage
Language	English

Summary

Site Preparation

Floor Installation

Floor Panel Preparation

Prepare floor panels by punching holes, cutting slots, and knocking out tabs.

Connecting Floor Panels

Connect and align floor panels using screws for stability.

Wall Panel Installation

Install Left Side Walls

Install front and back left side wall panels.

Install Right Side Walls

Install front and back right side wall panels.

Install Front Left Side Wall Panel G

Install front left side wall panel G.

Roof and Door Installation

Install Back Roof Panel

Install back roof panel M and roof brace RB.

Install Middle Roof Panel

Install middle roof panel M and secure with pins and screws.

Install Front Roof Panel and Doors

Install front roof panel J and hang doors L and K.

Finishing and Safety

Secure Walls to Floor

Install screws to secure wall panels to the floor.

Install Door Hardware

Install lock hasp X and door handle T.

Maintenance and Safety Guidelines

Guidelines for shed stability, cleaning, and safe usage.