Ruby Tech FGS-2824 - Page 205

FGS-2824 User Manual
Publication date: July, 2005
Revision A1
195
enable flow-control
Syntax:
enable flow-control <range>
Description:
To enable the flow control function of the port.
Argument:
<range>: syntax 1,5-7, available from 1 to 24
Possible value:
<range>: 1 ~ 24
Example:
FGS-2824 (port)# enable flow-control 3-8
enable state
Syntax:
enable state <range>
Description:
To enable the communication capability of the port.
Argument:
<range>: syntax 1,5-7, available from 1 to 24
Possible value:
<range>: 1 ~ 24
Example:
FGS-2824 (port)# enable state 3-12
set speed-duplex
Syntax:
set speed-duplex <range> <auto|10half|10full|100half|100full|1Gfull>
Description:
To set up the speed and duplex of all ports.
Argument:
<range>:syntax 1,5-7, available from 1 to 24
<port-speed>:
auto: set auto-negotiation mode
10half: set speed/duplex 10M Half
10full: set speed/duplex 10M Full
100half: set speed/duplex 100M Half
100full: set speed/duplex 100M Full
1Gfull: set speed/duplex 1G Full.
Possible value:
<range>: 1 to 24
<port-speed>: auto, 10half, 10full, 100half, 100full, 1Gfull
Example:
FGS-2824(port)# set speed-duplex 5 auto