Managing the AP
Viewing Associated Wireless Clients
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 165
Viewing Associated Wireless Clients
A usage-monitoring capability has been built into the AP to help you monitor wireless
clients that are associated with your wireless network.
1 Go to Status > Wireless. The Status > Wireless page appears.
NOTE If you are using a dual-band AP, then go to Status > Radio 2.4G or Status
> Radio 5G.
2 Click any of the Wireless # tabs. Wireless clients that are associated with this
particular wireless network appear under Connected Devices.
Figure 78. Viewing connected devices
To Next Page
Loading...
