Rugged Ridge 11703.04 - User Manual

Copyright © 2019 Omix-Ada
®
, Inc.
460 HORIZON DR. | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 844-270-0593 | www.Omix-ADA.com
Rugged Ridge Roof Rack Basket, JL & JT
Page 1/4
Part #11703.04
OMIX-ADA
®
TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649
FOR WARRANTY OR TECH CONCERNS EMAIL: webmaster@omixsupport.com
Components
1. Side Rail, Driver Side ................................................................. 1
2. Side Rail, Passenger Side ......................................................... 1
3. Rear Panel ................................................................................. 1
4. Front Panel ................................................................................ 1
5. Center Brace ............................................................................ 5
6. Roof Bracket ............................................................................. 6
7. Clamp for Roof Bracket ........................................................... 6
8. M8 X 25mm Button Head Allen Bolt ..................................... 18
9. M8 X 16mm Button Head Allen Bolt ..................................... 18
10. Flat Washer .............................................................................. 36
11. Serrated Flange Nut ............................................................... 30
12. Allen Key .................................................................................... 1

Summary

Rugged Ridge Roof Rack Basket Installation

Rack Assembly and Initial Fitment

Assemble the rear section to side rails using smaller bolts, then attach center braces to the front section using hardware.

Front Panel and Vehicle Placement

Fit the front panel, tighten most hardware, and carefully place the assembled rack onto the Jeep roof with assistance.

Roof Bracket Securing and Final Tightening

Slide and adjust roof brackets to fit the roof channel, attach clamps, and fully tighten all bracket hardware.

Rugged Ridge 11703.04 Specifications