Rugged Ridge 13595.14 User Manual

460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | info@omix-ada.com
Voyager Top, Gladiator
OMIX-ADA
®
TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: techsupport@omix-ada.com
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
Components
Page 1/15
Part # 13595.14
1. Voyager Main Deck..............................(1)
2. Rear Window..........................................(1)
3. LH Door Surround Mounting Plate........(1)
4. RH Door Surround Mounting Plate.......(1)
5. Left Side Panel.......................................(1)
6. Right Side Panel.....................................(1)
7. Anti-Puddle Pole....................................(2)
8. Flip Top Header Assembly.........................(1)
9. LH Upright Lower Plastic............................(1)
10. RH Upright Lower Plastic..........................(1)
11. LH Upright..................................................(1)
12. RH Upright.................................................(1)
13. LH Upper Corner Plastic..........................(1)
14. RH Upper Corner Plastic..........................(1)
1
2
3
4
5
6
7
8
9
10
11 12
13
14

Rugged Ridge 13595.14 Specifications

General

Product Name	Rugged Ridge 13595.14
Category	Automobile Accessories
Color	Black
Material	Thermoplastic
Compatibility	Jeep Wrangler JK
Finish	Textured
Fit	Custom

Summary

Voyager Top Gladiator Components and Setup

Voyager Top Gladiator Components List

Lists all parts included in the Voyager Top kit for Gladiator models, referencing numbered diagrams.

Important Safety Information

Key safety guidelines and precautions to follow during installation of the Voyager Top.

Pre-Installation Requirements

Steps and conditions to prepare for installing the Voyager Top, including removing existing tops.

Voyager Top Gladiator Installation Steps

Driver Side Door Surround Assembly

Detailed instructions for assembling the driver's side door surround, steps 2-16.

Passenger Side Door Surround Assembly

Instructions to repeat the driver's side assembly for the passenger's side door surround, steps 12-17.

Latch and Header Assembly

Steps for securing door surrounds, installing latches, and folding header channel assembly, steps 17-22.

Main Deck and Windshield Installation

Instructions for rolling, lifting, and positioning the main deck onto the windshield gasket, steps 23-28.

Securing Soft Top and Final Adjustments

Steps for securing latches, straps, rear bow, and windows, including care instructions, steps 29-36.