RuggedCom RUGGEDSWITCH RS900G

2. Installation
RuggedCom® RuggedSwitch™ 14 RS900G Installation Guide Rev 107
Figure 2.6. RS232 Female Connector
Pin Signal
1 No Connection
2 Transmit Data
3 Receive Data
4 No Connection
5 Ground
6 No Connection
7 No Connection
8 No Connection
9 No Connection
Table 2.1. RS232 Female DCE Pinout
This port is not intended to be a permanent connection and the cable shall be less
than 2m (6.5 ft) in length.