Need help?Do you have a question about the RuggedCom RuggedSwitch RSG2100P and is the answer not in the manual?
General| Brand | RuggedCom |
|---|---|
| Model | RuggedSwitch RSG2100P |
| Category | Network Router |
| Language | English |
Describes the RSG2100P as an industrially hardened, PoE-enabled, modular Ethernet switch for demanding environments.
Lists key features such as Power over Ethernet (PoE), additional port options, and cyber security.
Explains the RSG2000 series display panel and its LED indicators for status and diagnostics.
Details the process of rack mounting using included adapter assemblies and screw types.
Explains panel and DIN rail mounting using specific adapters and diagrams.
Details the procedures and safety precautions for wiring power supplies and grounding the chassis.
Provides a step-by-step example of wiring the AC power supply (PS1) to the unit.
Shows an example of wiring the DC power supply (PS1) to the unit.
Explains the procedure for performing dielectric strength (HIPOT) testing and precautions.
Details how to wire the failsafe alarm relay for critical error condition signaling.
Describes the console port wiring for initial configuration and management via serial connection.
Covers the standard RJ45 copper ports, their features, and pin configuration.
Details the standard 4 PoE-compliant Ethernet ports and their power delivery capabilities.
Discusses transient suppression circuitry on copper ports for electrical protection.
Introduces different types of fiber optic ports and connector orientations for the switch.
Provides guidelines for cabling categories and compliance for Gigabit Ethernet.
Details the safe insertion, removal, and handling of pluggable SFP/GBIC optical modules.
Provides instructions on how to safely remove GBIC modules from the chassis.
Details the procedure for removing SFP modules using the bail latch.
Lists the input ranges, fuse ratings, and maximum power consumption for power supplies.
Details the specifications for the failsafe relay, including voltage, current, and capacity.
Outlines the various networking standards (IEEE 802.x) supported by the switch.
Specifies parameters for RJ45 twisted-pair ports like speed, duplex, cable type, and PoE details.
Introduces the fiber optic specifications for Ethernet/Fast Ethernet and Gigabit Ethernet.
Details optical specifications for Fast Ethernet ports, organized by module order code.
Lists optical specifications for Gigabit Ethernet ports, categorized by transceiver type.
Details electrical safety, electrical environment, and atmospheric test specifications.
Specifies ambient operating temperature, humidity, and storage conditions.
Provides dimensions, weight, and enclosure material details for the switch.
To Next Page
