RuggedCom RUGGEDSWITCH RS900G User Manual

1. Product Overview
RuggedCom® RuggedSwitch™ 7 RS900G Installation Guide Rev 107
1. Product Overview
The RuggedSwitch™ RS900G is an industrially hardened, fully managed Ethernet switch
providing dual fiber optical Gigabit Ethernet ports and eight Fast Ethernet copper ports. Designed
to operate reliably in harsh industrial environments, the RS900G provides a high level of immunity
to electromagnetic interference and heavy electrical surges typical of environments found in
electric utility substations, factory floors or in curb side traffic control cabinets. An operating
temperature range of -40°C to +85°C coupled with hazardous location certification, a powder
coated aluminum enclosure and optional conformal coating allows the RS900G to be placed in
almost any location.
The embedded Rugged Operating System (ROS™) provides advanced networking features such
as Enhanced Rapid Spanning Tree (eRSTP™), Port Rate Limiting and a full array of intelligent
functionality for high network availability and manageability.
Ethernet Ports
• 2 - Fiber Optic Gigabit-Ethernet Ports(1000BaseX)
• 8 - Fast Ethernet Ports (10/100BaseTX)
• Full compliance with IEEE: 802.3, 802.3u and 802.3z
• Non-blocking, store and forward switching
• Full duplex operation and flow control (IEEE 802.3x)
• Industry standard fiber optical connectors: LC, SC, SFP
• Bi-Directional simplex fiber support
• Long haul optics allow Gigabit distances up to 70km
RuggedRated™ for Reliability in Harsh Environments
• Meets IEEE 1613 (electric utility substations)
• Exceeds IEC 61850-3 (electric utility substations)
• Exceeds IEEE 61800-3 (variable speed drive systems)
• Exceeds IEC 61000-6-2 (generic industrial environment)
• Exceeds NEMA TS-2 (traffic control equipment)
• Hazardous Location Certification: Class 1 Division 2
• -40 to +85°C operating temperature (no fans)
• Conformal coated circuit boards (optional)
• Rugged powder coated aluminum enclosure
Universal Power Supply Options
• Fully integrated power supply
• Universal high-voltage range: 88-300VDC or 85-264VAC
• Dual low-voltage DC inputs (12, 24 or 48 VDC)
• CSA/UL 60950 safety approved to +85°C

RuggedCom RUGGEDSWITCH RS900G Specifications

General

Brand	RuggedCom
Model	RUGGEDSWITCH RS900G
Category	Network Router
Language	English