PREFACE
Every attempt has been made to present within this service manual, accurate and up to date
technical information. However, development on the Ruggerini series is continuos. Therefore, the
information within this manual is subject to change without notice and without obligation.
The information contained within this service manual is the sole property of Lombardini. As such,
no reproduction or replication in whole or part is allowed without the express written permission of
Lombardini.
Information presented within this manual assumes the following:
1 - The person or persons performing service work on Ruggerini series engines is properly trained
and equipped to safely and professionally perform the subject operation;
2 - The person or persons performing service work on Ruggerini series engines possesses
adequate hand and Lombardini special tools to safely and professionally perform the subject
service operation;
3 - The person or persons performing service work on Ruggerini series engines has read the
pertinent information regarding the subject service operations and fully understands the operation
at hand.
GENERAL SERVICE MANUAL NOTES:
1- Use only genuine Lombardini repair parts. Failure to use genuine Ruggerini parts could result in
sub-standard performance and low longevity.
2- All data presented are in metric format. That is, dimensions are presented in millimeters (mm),
torque is presented in Newton-meters (Nm), weight is presented in kilograms (Kg), volume is
presented in liters or cubic centimeters (cc) and pressure is presented in barometric units (bar).
To Next Page
Loading...
