Reyee Series Implementation Cookbook
9-57
subnet mask is 255.255.255.0, set the IP address of the PC to 192.168.110.X (X is any integer ranging from 2 to 254), and
the subnet mask is 255.255.255.0.
(3) Run the ping command to test the connectivity between the PC and the device.
(4) If the login failure persists, restore the device to factory settings.
8. What can I do if I forget my username and password? How to restore the factory settings?
To restore the factory settings, power on the device, and press and hold the Reset button for 5s or more, and release the
Reset button after the system LED indicator blinks. The device automatically restores the factory settings and restarts. The
original configuration will be lost after the factory settings are restored. After the restoration, the default management
address is http://10.44.77.254. You can set the username and password upon first login.
To Next Page
Loading...
Need help?
General
