Cookbook Configuration
116
Control the access between the designated source security zone and the
destination security zone.
Control the access between the designated source security zone and the
destination security zone.
The description of the zone policy.
Indicate the policy priority. The lower value stands for the higher priority. The
policy of higher priority is matched preferentially if multiple zone policies are
configured.
Indicate the mode of matching packets, which supports matching packets
based on the IP range or ACL rules.
(4) Configure the IP range according to the following information and click Finish. If you select Cite ACL Policy
for the policy configuration mode, skip this procedure and move on to next step.
Note
After the IP range is configured, the access is allowed or blocked according to the ACL policy with which the IP
range matches.
To Next Page
Loading...
Need help?
General
