Ruijie Reyee RG-NBS3100 Series - Upgrade Procedure; Upgrade Device

Release Notes Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
5
⚫ After an upgrade to the new version, navigate to Eweb > Local > Home > Basics to verify the version
information, including the software version number, SN and model. See Upgrade Procedure for details.
6.4 Upgrade Procedure
⚫ Connect the device with a PC and configure the PC with an IP address in network segment
10.44.77.10/255.255.255.0.
⚫ Power on the device. After the system LED turns solid on, open a browser, enter 10.44.77.200 into the
address bar and press Enter.
⚫ Log into the system and complete wizard configuration.
⚫ Navigate to System > Upgrade > Local Upgrade. Click Browse, select an upgrade file (e.g.,
SWITCH_3.0(1)B11P212_NBS3100_10182917.tar.gz) and click Upload. After an upgrade to the new
version, verify the version information.
6.3.1 Upgrade Device