Copyright ©2022 Ruko All Rights Reserved.
15
F11GIM User Manual
Unfold the front arms
Take off the Gimbal Cover
Unfold the rear arms and then unfold all the propellers
Gimbal
Propeller
Motor
Unfold the front arms before unfolding the rear arms.
Before powering on the aircraft, ensure that the front and rear arms
are extended and the camera is placed on the horizontal ground.
Ensure that there is sufficient space under the camera to prevent the
camera angle from being stuck to the ground during the self-check.
All aircraft arms are folded before the aircraft is packaged. Follow
the steps below to unfold the aircraft arms.
2.4 Aircraft Diagram
2.3 Preparing the Aircraft
①
②
③
LED Indicator Light
Intelligent Battery
Power Button
④
⑤
⑥
To Next Page
Loading...
