Copyright ©2022 Ruko All Rights Reserved.
46
F11GIM User Manual
When the Aircraft's flight state is tilted and unstable, please
land the Aircraft on a level ground for gyroscope/horizontal
calibration.
When Aircraft resets the gyroscope/horizontal calibration, the
camera will also swing up and down again for self-checking to
ensure that there is enough space at the bottom of the camera.
6.4 Starting/Stopping the Motors
Please choose a flat ground to land.
Starting the Motors
Push the joysticks into 5 & 7’o clock positions to
start the motor.
Stopping the Motors
After the motor starts rotating, there are two
ways to stop:
Method 1: After the Aircraft takes off, push the throttle stick to the
lowest position and operate the Aircraft to land until the motor
stops, then release the joystick.
Method 2: When the flight is not taking off, Push the joysticks into
5 & 7’o clock position to start the motor. After the motor is turned
off, please release the joystick immediately.
Manually Land the Aircraft
When you need to manually land the Aircraft, continue to push the
Transmitter throttle lever downwards. Do not release the throttle
lever during landing until the Aircraft lands and the motors stop.
Take-off
After the Aircraft is calibrated, users can use the take-off function:
Method 1: Start the motor after confirming the safe take-off
conditions.
Tap One-key Take-off button on the App to take off.
The Aircraft will take off automatically and hover at a
distance of 4 ft from the ground.
③
6.5 Take-off / Landing
①
②
To Next Page
Loading...
