RUKO F11GIM - Return to Home

Copyright ©2022 Ruko All Rights Reserved.
19
F11GIM User Manual
The front is white
and the back is blue
The front is white
and the back is blue
The front is white
and the back is blue
White and blue are blinking
blinking twice every second
blinking once every second
White and blue are
blinking fast
White and blue always turn on
Gyroscope/level calibration is required.
GPS signal is detected and take-off
conditions are met.
Searching for GPS
Blinking twice per second indicates GPS
signal has not been found.
Blinking once per second indicates that
GPS signal is detected but the
conditions for takeoff are not met.
Color of light Blinking status of the indicator Conditions
The Return to Home (RTH）function brings the aircraft back to the
last recorded Home Point. There are three types of RTH: Smart RTH,
Low Battery RTH, and Signal Disconnection RTH. If you activate the
RTH function under the condition that the Aircraft successfully
recorded the Home Point and GPS signal is good, the Aircraft will
automatically return to the Home Point and land.
3.3 Return to Home
Smart RTH
When the pilot needs the Aircraft to return home automatically, he
can click the smart RTH button on Transmitter or tap the return
home icon on the RUKO DRONE App to activate RTH.
Home Point
When flying outdoors, the GPS signal icon is displayed with 3
bars or more for the first time, and the take-off location will
record the Aircraft's current position as the Home Point.
During the flight, if the Aircraft lands at a new location, the point
from which you retook off will become the latest Home Point, and
the Aircraft will return to the latest Home Point.
Using five bars
of signal
GPS Description