Runxin 17603 - Page 33

MODEL F73（17603）
30
（3） The steps of parameter setting
Item
Process Step
Symbol
Time of Day
When time of day “12:12” continuously
flash, it reminds to reset
1. Press to enter into program
display mode; both and
symbol light on.
2. Press , both and hour value
flash, through or to adjust the
value.
3. Press again, both and minute
value flash, through or to
adjust the minute value.
4. Press button to finish
adjustment then press to return
back.
Control Mode
1. Press in control mode enquiry
status to enter into setting status, then
and 01 flash.
2. Press or ，set the value to be
A-01, A-03, A-11 or A-13 control mode.
3. Press button to finish
adjustment then press to turn back.
Interval
Backwash
Times
1. In Interval backwash times display
status, it shows F-00. Press and
enter into program set mode. and
00 value flash.
2 ． Press or to adjust the
interval backwash times value.
3. Press and to finish adjustment,
press to turn back.
Water
Treatment
Capacity
1. In water treatment capacity display
status, it shows and 10.00. Press
and enter into program set mode.
and 10.00 flash.
2. Press or to adjust the water
treatment capacity value（m
3
）
3. Press and to finish adjustment
then press to turn back.