MODEL F73（17603）
33
regeneration, the chloridion in the outlet water is always higher than
normal, indicating that there is not enough time for fast rinse. If you want
the time to set to 15 minutes, the modification steps as follows:
① Press and hold both and to lift the button lock status
（ light off）
② Press ，and light on.
③ 1-12M；Press or continuously until light on. Then
the digital area shows: 1-12M.
④ Press , and 12 flash.
⑤ Press continuously until 12 changed to 15
⑥ Press , there is a sound “Di” and the figure stop flashing; the
program back to enquiry status.
⑦ If you want to adjust other parameters, you can repeat the
steps from ② to ⑤. If you don’t, press and quit from the enquiry
status.
To Next Page
Loading...
