Runxin 17603 - Page 35

MODEL F73（17603）
32
Backwash
Time
1. In backwash time display status, it
shows and 2-10. Press and
enter into program set mode. and
10 flash.
2. Press or to adjust the backwash
time (minute).
3. Press to finish adjustment then
press to turn back.
Brine& Slow
Rinse Time
1. In brine & slow rinse time display
status, it shows and 3-60. Press
and enter into program set mode.
and 60 flash.
2. Press or to adjust the brine
time (minute).
3. Press and finish adjustment
then press to turn back.
Brine Refill
Time
1. In brine refill time display status, it
shows and 4-05. Press and
enter into program set mode. and
05 flash.
2. Press or to modify the brine
refill time (minute).
3. Press to finish adjustment then
press to turn back.
Maximum
Interval
Regeneration
Days
1. In maximum interval regeneration
days display status, it shows H-30.
Press and enter into program set
mode. and 30 flash.
2. Press or to adjust the
Interval regeneration days.
3. Press to finish adjustment then
press to turn back.
Signal
Output Mode
1. In signal output mode display status,
it shows b-01. Press and enter into
program set mode. and 01 flash.
2. Press or to adjust the b-02.
3. Press to finish adjustment then
press to turn back.
For example，the fast rinse time of a softener is 12 minutes. After