4. Insert the power cord into a 230-240V AC power outlet and switch the power on.
Press the power switch to turn the espresso machine on (6). The light located on
the power button will illuminate red and the ‘heating’ light will illuminate orange.
This is to indicate that the espresso machine is on and heating up. When the
‘heating’ light switches off, this indicates that the espresso machine is heated and
ready to use (7).
Note: Before turning on the espresso machine, ensure that the operating dial is
in the ‘off’ position.
5. Place the glasses and cups on the warming plate (8).
Important: For first time use or if the machine has not been used for some time,
it is important that the machine is rinsed as follows
6. Fit the filter handle with either the one or two cup filter basket (9). Secure the
filter handle to the group head (10) + (11).
7. Place a large enough container under both pouring spouts (12).
8. Turn the operating dial clockwise to the espresso setting (13) and allow the
water to run through until the water reservoir is empty.
USING THE CONTROL PANELS
Power
Press the ‘POWER’ switch to turn the espresso machine on. The light located on the
power switch will illuminate red and the ‘HEATING’ light will illuminate orange; this is to
indicate that your espresso machine is on and is heating up.
Note: Before turning on the espresso machine ensure that the operating dial is in the off
position.
To Next Page
Loading...
