A. Should you want the espresso machine to texture milk, you need to press the
‘steam/hot water’ switch to the setting. The amber ‘HEATING’ light will
illuminate, indicating that the espresso machine is adjusting the temperature of
the heating system.
B. Should you want to use the ‘hot water’ function, you need to press the ‘steam/hot
water’ switch to the setting.
When the espresso machine is at the correct temperature, the ‘HEATING’ light
will go off. Simply turn the operating dial anticlockwise to the steam/hot water
setting to start and turn it back to the off position to stop.
OPERATING THE ESPRESSO MACHINE
Before starting to prepare for making espresso, ensure the espresso machine is
switched on, to allow the espresso machine to heat up.
To Next Page
Loading...
