CLEANING THE FILTERS
Cleaning the Filters
There are two filters in the carpet washer that must be cleaned
regularly to maintain performance.
AFTER CLEANING:
Allow the carpet to dry completely. Try not to walk on the carpet until
it is dry. If it is necessary to walk on the carpet, place white towels on
the areas to be walked on. If the carpet is not dry and the furniture
must be placed back in the room, use plastic or foil under the
furniture to prevent staining the carpet. Thoroughly clean the dirty
water tank with warm (max 40ºC) tap water.
Dirty Water Tank Filter
There is a filter located in the top of the dirty water tank. Remove
the filter cover from the top of the dirty water tank, remove the
filter and rinse with warm water. Allow it to dry thoroughly before
storing.
12
To Next Page
Loading...
