Russell Hobbs RHRV200 R-VAC PET - Page 11

11
FUNCTIONS OF THE REMOTE CONTROL:
To set the current time:
NOTE: The Remote control uses 24 Hour time only.
Duringsetup,pressthe
button to quit at any time.
To set the correct time -
1. Press the TIMER button.
2. The 1
st
‘time’digitwillash.Usethe“˄”and“˅” to change the number.
3. Pressthe“˂”“˃”buttons to scroll left and right, and change the Hour and Minutes using
the“˄”and“˅” buttons.
4. Oncethecorrecttimeisdisplayed,presstheTIMERbuttontolockinthetimeandstart
the clock.
To set the current weekday:
The numbers at the top of the screen represent days of the week:
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
7 = Sunday
1. PresstheTIMERbutton,thenpress“˂”.
2. Thesquarearoundanumberatthetopofthescreenwillthenbegintoash.
3. Pressthe“˄”and“˅” buttons to scroll left and right through the weekdays.
4. When your current day is selected, lock it in by pressing the TIMER button.
SCHEDULE/PROGRAM YOUR VACUUM
You can program your R-Vac Pet to begin cleaning automatically, by following the steps below:
A. Pre-set time. Set the time you would like your vacuum cleaner to begin cleaning.
1. Press the SET button.
2. Thehourdigitwillash.Usethe“^”and“˅” to change the number.
3. Pressthe“<”“>”buttonstoscrollbetweentheHourandMinutessettingandusingthe
“^”and“˅” buttons to set the start cleaning time.
4. When the desired start time is shown, lock in the time by pressing the SET button.
B. Pre-Set the Weekday
The numbers at the top of the screen represent days of the week:
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
7 = Sunday