Russell Hobbs RHRV200 R-VAC PET - Charging Station; Automatic Charging

14
CHARGING STATION:
Docking Station：
LED indicator
Infrared signal transmitting
window
Internal synchronise
button (on back of
charging station)
Charging electrode
DC socket
Figure 2
The Charging Station is synchronised with your vacuum cleaner prior to purchase.
Automatic Charging:
1. Position the Charging Station on a hard, level surface against a wall.
2. Ensure there are no obstacles 3 metres in front of the Charging Station or 0.5 metres
on the right and left.
IMPORTANT: Ensure the infrared signal transmitting window on the Charging Station is not
covered;otherwisethevacuumwillnotbeabletondtheChargingStation.
3. ConnecttheoutputterminaloftheadaptorwithDCsocketontheChargingStation.
(Refer to Figure 2)
Figure 1
Figure 2
High Voltage! Electrical hazard! Please
dry your hands before plugging in.