Russell Hobbs RHTTDW6W User Manual

Maintenance & Cleaning
To remove the filter device, twist the coarse filer (B) and pull it in a upwards direction. All parts
of the filter will lift away from the bottom of the appliance
A
34
B
C
Important notes:
• Inspect the filters for blocking after every use
• The filter system must be cleaned at lease once a week
• When cleaning the filters, don't knock/tap them. Otherwise, the filters could be contorted
and the performance of the dishwasher could be affected.
1. Turn the fine filter (B) in anti-clockwise
direction, then pull it in a upwards direction
2. Remove the coarse filter (A) by pulling it
from the fine filter (B)
3. Remove the main filter (C) by pulling it from
the base of the cavity
4. To replace the filter reverse steps 1, 2 and 3.

Russell Hobbs RHTTDW6W Specifications

General

Door color	White
Control type	Buttons
Product size	Compact
Built-in display	Yes
Custom panel-ready	-
Appliance placement	Freestanding
Cycle time	230 min
Noise level	49 dB
Delay start (max)	24 h
Dishwashing programs	Eco, Glass/delicate, Intensive, Quick, Universal
Number of place settings	6 place settings
Number of washing programs	6
Maximum water flow pressure	1000 kPa
Minimum water flow pressure	40 kPa
Cycle time (quick washing program)	30 min
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Water consumption per cycle	6.5 L
Energy consumption per cycle	0.613 kWh

Weight and Dimensions

Depth	500 mm
Width	550 mm
Height	438 mm