Russell Hobbs RHTTDW6W User Manual

8
Unpacking the appliance
1. Remove the appliance from all packaging and check that the product has not been damaged
during transportation. If it has been damaged, contact the manufacturer or the retailer and
do not proceed any further with the installation process. Below are key areas to check:
• A misaligned door
• Damage to the door
• Dents or holes in side panels and the top panel.
• Dents in the inside
• If you can see any damage do not use the dishwasher
Before using your dishwasher for the first time:
Before using the dishwasher for the first time you must complete the following, as failure to do
so will invalidate the guarantee:
1. Connection to the water and electricity supplies should only be performed by a qualified
technician.
2. Set the water softener
3. Add 1.0Kg dishwasher salt and then fully fill the salt container with water
4. Fill the rinse aid dispenser
5. Fill the detergent dispenser
6. Run the unit empty on the intensive cycle to clean out any impurities caused by the
manufacturing process.

Russell Hobbs RHTTDW6W Specifications

General

Door color	White
Control type	Buttons
Product size	Compact
Built-in display	Yes
Custom panel-ready	-
Appliance placement	Freestanding
Cycle time	230 min
Noise level	49 dB
Delay start (max)	24 h
Dishwashing programs	Eco, Glass/delicate, Intensive, Quick, Universal
Number of place settings	6 place settings
Number of washing programs	6
Maximum water flow pressure	1000 kPa
Minimum water flow pressure	40 kPa
Cycle time (quick washing program)	30 min
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Water consumption per cycle	6.5 L
Energy consumption per cycle	0.613 kWh

Weight and Dimensions

Depth	500 mm
Width	550 mm
Height	438 mm