BA.GB.12-27409-05-07-FTA-jr
5.2 Measurements before starting a journey
The Operating Instructions of the chassis manufacturer must be observed.
Additional checks before starting the engine:
visually for damage (fissures, deformations, corrosion at carrying
parts, fastening and locking of removable connections, leakages
etc.)
Ruthmann-Steiger in transport position,
Additional checks after switching on the ignition:
The Pilot lamps „Steiger not in transport position“ and „Stabilizing
jacks not in basic position“ on the electrical control panel of the in-
strument panel has to have extinguished.
To Next Page
Loading...
