BA.GB.12-27409-05-07-FTA-jr
10 Optional equipment
10.1 Programmable telescopic extension limitation
Using the programmable telescopic extension limitation it is possible to limit
the maximum extent to which the telescope can be extended. The exten-
sion limitation set (the maximum working height that can currently be
reached) can be read and programmed on the plain text display of the con-
trol panel for the emergency control system. The following maximum work-
ing heights can be set:
Lowest maximum working height: approx. 11 m
Greatest maximum working height: approx. 27 m
Gradation: approx. 1 m
The programming of the extension limitation desired is carried out as fol-
lows:
Scroll to the corresponding display page of the plain
text indication by means of the push button „page
up“.
Adjusttlscopeextsion
in m with sp.funct.
„momentary max. attainable
working height in metres“
Depress push button „Special function“. Each time
the „Special function“ button is pressed the value
displayed will increase by the gradation cited
above. When the maximum value is reached, the
next time the „Special function“ button is pressed
the indication will jump to the minimum value pos-
sible to set.
Continue using the button „Display up“ or „Display
down“.
Note
The value set in this manner will be kept (even after the igni-
tion is switched off) until it is reprogrammed. After such pro-
gramming it is a good idea to switch off the ignition once so
To Next Page
Loading...
