RUTHMANN Steiger TB270 - Inspection and Maintenance

9 Maintenance
9-26
RUTHMANN-Steiger
®
TB270
BA.GB.12-27409-05-07-FTA-jr
9.4 Inspection and Maintenance
Before substantial inspection and repair works are started the Ruthmann-
Steiger must be cleaned. All defects found during the inspection have to be
eliminated immediately.
9.4.1 Inspection List / Maintenance List
Explanations concerning the intervals:
d = daily or per working shift
300 h = after 300 operating hours
600 h = after 600 operating hours
a = annually
 = Inspection work
W = Maintenance work
S = Test by an expert
Inspection List / Maintenance List
Interval
Remark,
Component
Work to be carried out
d
300
h
600
h
a
other inter-
vals
Generally
Lighting
Check for function and cleanness

Clean
W, if necessary
Oper. materi-
als
Check fuel reserve

Complete
vehicle
visually for damage (fissures,
deformations, corrosion)

Check painting (scratches, crack-
offs)

Visual and function test of safety
devices

Ruthmann-Steiger
Ruthmann-
Steiger
Regular inspection acc. to
BGR 500 - 2.10
S
complete
Visual check

Clean
W
W, if necessary
Check inscription for complete-
ness and legibility
