RUTHMANN Steiger TB270 - Input of Password

6 Operation
BA.GB.12-27409-05-07-FTA-jr
RUTHMANN-Steiger
®
TB270
6-41
Note
If the password is not known any longer, our after-sales-
service can again be read it out.
6.6.6.2.1 Input of password
For the input of the password firstly the push button „page up“ must be de-
pressed as often as on the display the message „Password required!
Cont. = Special Funct.“ or „Password already typed in“ appears
Plain text indication
Execution
Scroll to the corresponding display page of the plain
text indication by means of the push button „page
up“.
x Password required!
Cont.=Special funct.
Depress push button „Special function“
Input of Password
then Special funct.
Input of key sequence (max. 5 symbols)
1
Depress push button „Special function“
Password correct
following display page
Depress push button „page up“ as often, until the
desired protected page is reached.
Password wrong
No permission!
Cont.=Special funct.
Depress push button „Special function“
2
x Password required!
Cont.=Special funct.
Depress push button „Special function“
Input of Password
then Special funct.
Input of key sequence (max. 5 symbols)
1
Note
1 During the input the function of the push buttons for Stei-
ger movements is interrupted. Now the necessary push
buttons must be depressed in the right sequence. The
push button „Special function“ itself cannot be part of the
password.