Note
It is only allowed to use the individual control of the stabiliz-
ing jacks, when the axles of the chassis are released. The
wheels of the chassis must have ground clearance.
By means of the push-button „Jack vertical down“ and the
push-button for the corresponding stabilizing jack, the stabi-
lizing jack cylinders can be vertically extended in an individ-
ual way.
Depress push button „Jack vertical
down“ as well as also actuate push
button „Jack front left“,
and/or
Depress push button „Jack vertical
down“ as well as also actuate push
button „Jack rear left“,
and/or
Depress push button „Jack vertical
down“ as well as also actuate push
button „Jack front right“,
and/or
Depress push button „Jack vertical
down“ as well as also actuate push
button „Jack rear right“.
Check inclination of the Steiger!
To Next Page
Loading...
