BA.GB.12-27409-05-07-FTA-jr
6.6 Handling of operating panel of emergency control
Steiger movements (Control commands):
Pre-condition:
Hydraulic pump drive switched-on.
Control stand „Emergency Control“ switched-on.
In the control stand selection „Emergency Control“ the push buttons of the
operating panel are released, among other things, for the control of the
Steiger:
Switching-off / -on of vehicle engine,
Extend / retract stabilizing jacks,
Boom movements,
Cage rotation,
Modification of working cage inclination „Cage up / Cage down“.
Note
The emergency control may only be used in case of emer-
gency under mutual agreement with the cage crew and for
maintenance purposes.
The movements are started by depressing the corresponding push buttons.
Some of the push buttons are given several functions. For starting a Stei-
ger-movement the push button of the component to be moved must be ac-
tuated at first and then the second push button of the corresponding
movement. After having started the second push button can be released
again. The movement will be carried out as long as it is stopped by releas-
ing the first push button or by interruption through the control.
To Next Page
Loading...
