EasyManua.ls Logo

RUTHMANN Steiger TB270 - Page 17

Default Icon
261 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Index
BA.GB.12-27409-05-07-FTA-jr
RUTHMANN-Steiger
®
TB270
V
6.6.6.2.2 Alteration of Password ........................................................... 6-42
6.6.6.3 Setting of clock ...................................................................... 6-43
6.6.7 Switching-over of the boom movements which should be
carried out simultaneously...................................................... 6-45
6.6.8 Changing of the jacking variant with „Minimum jacking“ ......... 6-45
6.6.9 Deactivation or activation of the possibility of sensitive
control .................................................................................... 6-46
6.7 Sensitive control 6-47
7 Emergency control system (Emergency
Lowering) 7-1
7.1 Failure of main drive power 7-3
7.2 Failure of operating staff 7-4
7.3 Failure of electrical system / electronic system
(extreme case) 7-5
7.4 Emergency lowering after an interruption of the Steiger
movements through a „conditional emergency cut-off“ 7-8
7.5 Manual adjustment of cage inclination 7-10
8 Rectification of malfunctions 8-1
8.1 Handling problems on the control during Steiger-
operation 8-1
8.2 Effect of a malfunction on Steiger-operation 8-5
8.2.1 Restricted Steiger-operation .................................................... 8-5
8.2.2 Conditional Emergency Cut-off ................................................ 8-5
8.2.3 Emergency Cut-off ................................................................... 8-6
8.3 Reading of fault memory 8-7
8.3.1 Meaning of the fault messages and information about
remedy ..................................................................................... 8-8
9 Maintenance 9-1
9.1 Lubrication 9-4
9.1.1 Lubricants ................................................................................ 9-4
9.1.2 Lubricating point list ................................................................. 9-5
9.1.3 Lubricating point plan ............................................................... 9-7
9.2 Tightening Moments 9-8
9.2.1 Screw connections ................................................................... 9-8

Related product manuals