RUTHMANN Steiger TB270 - Page 184

8 Rectification of
malfunctions
8-12
RUTHMANN-Steiger
®
TB270
BA.GB.12-27409-05-07-FTA-jr
Code
Possible cause
Remedy
84
 Signal inclination meter „Vehicle
longitudinal axis“ between main
and control processor are dif-
ferent.
 Notify RUTHMANN-after-
sales-service.
86
 Signal inclination meter „Vehicle
transverse axis“ between main
and control processor are dif-
ferent.
 Notify RUTHMANN-after-
sales-service.
93
 Switch „Jack retracted“ defec-
tive.
 Switch „Wheels free“ (axle in-
quiry) defective.
 Notify RUTHMANN-after-
sales-service.
94
 Voltage of joystick „Boom“
wrong.
 Notify RUTHMANN-after-
sales-service.
95
 Voltage of joystick „Rotation“
wrong.
 Notify RUTHMANN-after-
sales-service.
96
 Voltage of joystick „Telescope“
wrong.
 Notify RUTHMANN-after-
sales-service.
99
 Program-cycles too long.
 Notify RUTHMANN-after-
sales-service.
100
to
121
 Exits defective.
 Fuse F 15 defective.
 Notify RUTHMANN-after-
sales-service.
 Check fuse.
122
to
131
 Exits defective.
 Fuse F 14 defective.
 Notify RUTHMANN-after-
sales-service.
 Check fuse.
132
to
147
 Exits defective.
 Fuse F 13 defective.
 Notify RUTHMANN-after-
sales-service.
 Check fuse.
148
to
201
 Digital entries defective.
 Notify RUTHMANN-after-
sales-service.
226
 The working cage is outside of
the permissible sector.
 The boom must manually be
moved back into the permis-
sible sector by means of the
solenoid valves.
228
 Consumer load defective.
 Check fuse of the consumer
load.
 Notify RUTHMANN-after-
sales-service.
233
 Total inclination of vehicle be-
tween main and control proces-
sor are different.
 Notify RUTHMANN-after-
sales-service.