BA.GB.12-27409-05-07-FTA-jr
9.5.2 Exchange of constructional components
Constructional components that fit together with screws must always be
mounted back by means of screws of the same size and quality class.
Screws with microencapsulated adhesive and self-locking nuts must be re-
placed after each demounting. All supporting surfaces must be even and
free of paint, acid, dirt and rust. Screw fittings secured with Loctite must
again be secured expertly with Loctite. Before using Loctite the EC-safety
data sheet must be observed. For tightening moments of screws please
see chapter 9.2.
To Next Page
Loading...
