RWC JG Underfloor - Programme Setting; Programming Modes (4;6 Period); Default Programming Schedules; Restoring Factory Settings

8
Programme setting
,
, .
Default programming
(6 period programming)
Programme setting: 4/6 period programming optional
(factory default: 6 period).
When thermostat is on, press and hold ‘ ’ to enter the programming mode.
Press ‘ ’ or ‘ ’ to select the programming week (5+2, 5+1+1 or 7 individual
day optional).
Press ‘ ’ to enter time setting mode. Press ‘ ’ or ‘ ’ to select time, press ‘ ’
to enter temperature setting mode, Press ‘ ’ or ‘ ’ to select temperature.
Press ‘ ’ to save and exit. If no buttons are pushed for 10 seconds, the
thermostat will exit program setting automatic.
In programming state, press and hold ‘ ’ ‘ ’ at the same time to restore
factory settings, display ‘ ’
Default programming (6 period programming)
,
, .
Default programming
(4 period programming)
(6 period programming)
Wake up
6:00
20°C
Away
8:00
16°C
Back home
11:00
20°C
14:00
16°C
Back home
18:00
20°C
22:00
16°C
Sleep
Away
Wake up
6:00
20°C
8:00
16°C
Back home
18:00
20°C
22:00
16°C
Sleep
Away
(4 period programming)