9
Operation mode
Programming mode (The factory default is programmable)
The thermostat will run according to the pre-set schedule. The screen will
show ‘ ’
Manual mode
From programming operation mode, press ‘ ’ to enter the manual mode,
the screen will display ‘ ’. Press ‘ ’ or ‘ ’ to immediately adjust the
temperature and save automatically.
Temporary hold mode
The thermostat will keep the room at the temporary set temperature, and will
resume the programme operation mode when you enter the next programme.
In programming operation mode, press ‘ ’ or ‘ ’ to enter the temporary hold
mode, the screen display ‘ ’. Press ‘ ’ or ‘ ’ to immediately adjust the
temperature and save automatically.
To Next Page