ryan 544951J - Blade Maintenance Procedures; Blade Sharpening Instructions

17
Jr.
Sodcutter
MAINTENANCE
BLADE SHARPENING
1. Hand le bottom blade at 45
O
angle until no at
remains.
2. To keep cutting edge less than 1/16" (1.5mm)
on 45
O
angle, grind milled surface back at 15
O
to
less than 1/16"(1.5mm).
3. Hand le side blades at 45
O
until no at remains.
4. To keep cutting edge less than 1/16"(1.5mm) on
45
O
angle, grind milled surface back at 15
O
to
less than 1/16"(1.5mm).
THIS
1/16"
Maximum
45
O
15
O
FILE
DIRECTION
SURFACE
SMOOTH
(No Burrs)
BOTTOM BLADE
(1.5mm)
MILLED
EDGE
FILE
DIRECTION
1/16" MAX
THIS SURFACE SMOOTH
(No Burrs)
FILE
DIRECTION
SIDE BLADE
(1.5mm)