Chapter 5 Troubles
and
Countermeasures
The paper leading edge does not contact the stop ¢
finger exactly due to poor paper cutting.
Cut the paper again.
I The paper is curled.
(Poor lateral registration)
Cause
The push side guide and spring is too strong.
The paper feed position
is
poor and the side edge
of
the paper contacts the stop finger.
The side edge
of
the paper does not contact the push
side guide exactly due to poor paper cutting.
I The paper is curled.
~90'
90~
t
~0'
90(:
¢
1.
Season the paper to correct it to be flat.
2.
Fix the paper curl. ( • Operation Edition- 73)
Countermeasure
¢ I Set the push side guide and spring.
Move the paper feed position laterally and set so that
it does not contact the stop finger.
Cut the paper again.
./90'
90~
t
1'\0'
90,/
¢
1.
Season the paper to correct it to be flat.
2.
Fix the paper curl. ( • Operation Edition - 73)
Maintenance Edition - 49
To Next Page
