Chapter 5 Troubles and Countermeasures
7) The paper is bent.
Cause
Poor positioning
of
the sheet separators
The paper
is
not fed smoothly to the retainers from
the pull-out rollers. (The paper
is
bent upward.)
8) The paper is wrinkled.
Cause
I The paper has waves.
I The impression pressure
is
too strong.
9) Poor roller cleaning
Cause
I The cleaning solution drys too fast.
Poor blade
pressure
on the
ink
roller cleanup
attachment
Maintenance Edition - 50
Countermeasure
Reposition the sheet separators.
( • Operation Edition- 28)
Reposition the retainers.
( • Operation Edition - 37)
Countermeasure
1.
Season the paper to correct it to be flat.
2.
Fix the paper curl. ( • Operation Edition - 73)
1.
Check the impression pressure adjustment dial
setting. ( • Operation Edition- 43)
2.
Check the blanket packing thickness.
( • Introduction Edition - 7)
Countermeasure
Use a cleaning solution that is slow drying.
Ask your service technician how
to
adjust it.
To Next Page
