To Next PageTo Next Page
Need help?Do you have a question about the Ryobi BE318-2 and is the answer not in the manual?
General| Type | Belt Sander |
|---|---|
| Belt Size | 3 in. x 18 in. |
| Power Source | Corded Electric |
| Voltage | 120V |
| No Load Speed | 820 FPM |
| Dust Collection | Yes |
Keep work area clean, no explosive atmospheres, keep bystanders away.
Double insulated plug, grounded surfaces, rain/wet conditions, cord care.
Stay alert, dress properly, avoid accidental starting, proper footing.
Secure workpiece, don't force tool, check switch, disconnect power, store idle tools, maintain tools.
Performed by qualified technician, use identical replacement parts.
Handle tool by insulated grips, know tool, wear protection, inspect cords.
Use good extension cords, remove nails from lumber.
Eliminates grounding need, protects user from shock.
Use correct gauge, outdoor use, inspect cord.
Connect to 120V, 60Hz AC, not DC.
Belt size, input voltage, amps, net weight.
Lock-on button, tension release lever, tracking knob, dust collection bag.
Remove tool and accessories, check for damage.
Lists included items: Belt Sander, Sanding Belt, Dust Collection Bag.
Avoid carelessness, wear eye protection, use recommended accessories.
Sanding wood, metals, plastics, smoothing rough boards, removing rust/paint.
Choose correct size/type for quality finish; grit usage.
Steps to install or change belts, unplug tool first.
Adjust tracking knob to align belt with base edge.
Provides dust collection; do not use on metal.
Steps to attach the dust bag retainer.
Steps to empty the dust collection bag.
Depress switch trigger to turn on, release to turn off.
Locks switch trigger ON for extended periods.
Secure work, reach speed before contact, move slowly.
Use front and rear handles for control and safety.
Belt slipping? Too much pressure. Use coarser belt for heavy sanding.
Use only identical Ryobi parts; others create hazards.
Clean with clean cloths, avoid solvents on plastic.
Bearings are pre-lubricated for life; no further lubrication needed.
Contact nearest Ryobi Authorized Service Center for repair parts or service.
Location of model/serial number plate, space to record.
Provide model and serial number when ordering parts.
