Ryobi DP102L - Features; Product Specifications and Components

10 11
FEATURES
Fig. 2
Spindle Travel .........................................................2-3/8 in.
Table Size ........................................... 9-1/4 in. x 8-3/16 in.
Table Movement ...............................45° bevel, 360° swivel
Overall Height............................................................. 29 in.
Net Weight................................................................ 62 lbs.
PRODUCT SPECIFICATIONS
Chuck ........................................................................ 1/2 in.
Input ............................... 120 Volt, 60Hz, AC Only, 3 Amps
Motor........................................................1/4 HP Induction
No Load Speed ......................................... 570–3,050 RPM
Swing.......................................................................... 10 in.
FEED
HANDLE
CHUCK
TABLE
TABLE
ADJUSTMENT
HANDLE
WORKLIGHT
ON/OFF
SWITCH
LASER ON/OFF
SWITCH
POWER
SWITCH
LASER
WORKLIGHT
DEPTH
GAUGE
LOCK KNOB
BEVEL SCALE
VISE
BASE
SWITCH KEY