To Next Page

To Previous Page

OPERATION

4-5.5 mm

ADJUSTING THE CHAIN

TENSION

1. Remove the battery pack. Wear

protective gloves.

2. Turn the chain tensioner knob

counterclockwise to unlock the chain

tensioner adjustment ring.

3. Adjust the chain tension until the gap

between the drive teeth and the bar

is 4-5.5 mm. Turn the chain tensioner

adjustment ring clockwise to increase

the tension. Turn the adjustment ring

counterclockwise to reduce the tension.

NOTE: Frequently check the chain

tension while turning the knob.

4. Turn the chain tensioner knob clockwise

to lock the chain tensioner adjustment

ring.

Ryobi OCS1830BL User Manual

Questions and Answers: