PRODUCT SPECIFICATIONS
Cordless Chainsaw
Model OCS1830BL
Rated voltage 18 Volts
No-load speed 10 m/s
Guide bar length 300 mm
Usable cutting length 250 mm (10”)
Chain pitch 9.525 mm (0.375”)
Drive links 45
Drive sprocket 6 teeth x 0.375”
Chain oil tank capacity
210 ml
Weight (without battery pack, with
guide bar, chain and empty tank)
3.2 kg
Vibration level (in accordance with EN 60745-1 & EN 60745-2-
13)
Front handle 4.0 m/s
2
Rear handle 6.6 m/s
2
Uncertainty of measurement
1.5 m/s
2
Noise emission level (in accordance with EN 60745-1 & EN
60745-2-13)
A-weighted sound pressure level
at operator’s position
83.1 dB(A)
Uncertainty of measurement 2.5 dB
A-weighted sound power level 94.1 dB(A)
Uncertainty of measurement 2.5 dB
Sound power level (in accordance with ISO 3744)
Measured sound power level 93.5 dB(A)
Guaranteed sound power level 96 dB(A)
BATTERY AND CHARGER
Model OCS1830BL
Battery pack Not included
Weight -
Charger Not included
Compatible battery
packs
RB18L13, RB18L15, RB18L60A,
RB18L20, RB18L25, RB18L26,
RB18L40, RB18L50, RB18L90A,
Compatible Charger BCS618, RC18150, RC18627,
RC18120, BCL14181H, BCL14183H,
*BCL1418IV
For best performance, use RYOBI 6.0 Ah and 9.0 Ah batteries.
*The compatible charger is for charging in vehicles with 12 V DC
outlets.
REPLACEMENT PART (BAR AND CHAIN)
Manufacturer
OREGON TRI-LINK
Bar
591057 M1431245-1041HL
Chain
90PX045XTT PWFTCA1201
Chain must be tted with bar from the same manufacturer
according to above combinations.
VIBRATION LEVEL
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a preliminary
assessment of exposure.
The vibration emission during actual use of power tool can
differ from the declared total value depending on the ways
in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running
idle in addition to the trigger time.
To Next Page
Loading...
Need help?
General
