Ryobi RCS36X4 - Product Specifications; Vibration Level; Battery and Charger

PRODUCT SPECIFICATIONS
Cordless Chainsaw
Model
RCS36B1
Rated voltage 36 V d.c.
No-load speed 21.0 m/s
Guide bar length 356 mm
Usable cutting length 300 mm (12”)
Chain stopping time
<2 s
Chain oil tank capacity
190 ml
Weight (without battery pack, with
guide bar, chain and empty tank)
4.2 kg
Vibration level (in accordance with EN 60745-1 & EN 60745-2-
13)
Front handle
4.3 m/s
2
Rear handle
3.1 m/s
2
Uncertainty of measurement
1.5 m/s
2
Noise emission level (in accordance with EN 60745-1 & EN
60745-2-13)
A-weighted sound pressure level
at operator’s position
88.6 dB(A)
Uncertainty of measurement 2.5 dB
A-weighted sound power level 99.6 dB(A)
Uncertainty of measurement 2.5 dB
Noise emission level (in accordance with ISO 3744)
Measured sound power level 99.2 dB(A)
Guaranteed sound power level 101 dB(A)
Bar length 14”
Chain pitch 0.375”
Chain gauge 0.050”
Drive links quantity 52
BATTERY AND CHARGER
Model
RCS36X4 RCS36B1
Battery pack
BPL3640D2 Not included
Weight
1.4 kg -
Charger
BCL3617S Not included
Compatible
chargers
BCL3620, BCL3620S, BCL3650F, BCL3617S,
BCL3617U
Compatible
battery packs
BPL3640D, BPL3650D, BPL3650D2,
BPL3620D, BPL3626D2, BPL3640D2
Recommended
battery packs
for maximum
cutting
performance
BPL3640D, BPL3650D, BPL3650D2,
BPL3640D2
REPLACEMENT PART (BAR AND CHAIN)
Manufacturer TRILINK POWERFIT
Chain CL15052PT PWFTCA1403
Bar M1501452-1041
Chain must be tted with bar from the same manufacturer
according to above combinations.
VIBRATION LEVEL
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a preliminary
assessment of exposure.
The vibration emission during actual use of power tool can
differ from the declared total value depending on the ways
in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running
idle in addition to the trigger time.