Ryobi RCS4246B - User Manual



Important! 



Summary

Intended Use

Residual Risks

General Safety Rules

Specific Safety Rules

Refueling (Do Not Smoke!)

Kickback

Symbols

Service

Glossary of Terms

Specification

Assembly

Unpacking

Procedure for removing the product and accessories from the box and checking for damage.

Adjusting the Chain Tension

Operation

Know Your Chainsaw

Understanding the product's features and safety rules for safe operation.

Starting the Engine

Step-by-step instructions for starting the chainsaw engine, cold or warm.

Stopping the Engine

Procedure for safely shutting down the chainsaw engine.

Adjusting Idle Speed

How to adjust the engine's idle speed for proper operation.

Pull and Push

Understanding the forces and operator readiness during cutting.

Kickback Precautions

Information on preventing kickback and avoiding serious injury.

Preparing for Cutting

Ensuring proper safety equipment and stance before cutting.

Proper Grip on Handles

Guidance on maintaining a firm and safe grip on the chainsaw handles.

Proper Cutting Stance

Advice on maintaining balance and body position during cutting.

Work Area Precautions

Safety measures to ensure a clear and safe work environment.

Basic Operating;Cutting Procedures

Step-by-step guide for practicing basic cutting techniques.

Felling Trees in Hazardous Conditions

Warnings and precautions for felling trees in adverse weather.

Proper Procedure for Tree Felling

Detailed steps for safely felling a tree, including escape routes.

Removing Buttress Roots

Instructions for removing large roots before felling a tree.

Bucking

Procedure for cutting a fallen tree into desired log lengths.

Bucking with a Wedge

Using wedges to hold cuts open and prevent pinching during bucking.

Bucking Logs Under Stress

Techniques for cutting logs under tension to avoid pinching.

Overbucking

Cutting from the top side of a log to reduce the risk of the saw being pulled.

Underbucking

Cutting from the underside of a log, preparing for the saw pushing back.

Branch Trimming and Pruning

Safe methods for trimming branches and pruning limbs.

Maintenance

General Maintenance

General advice on cleaning and care of the chainsaw's plastic parts.

Lubrication

Information regarding the lubrication of the chainsaw's bearings.

Replacing the Guide Bar and Chain

Detailed steps for safely replacing the guide bar and saw chain.

Chain Maintenance

Procedures for maintaining the saw chain, including sharpening angles.

Sharpening the Cutters

Step-by-step guide for sharpening the chainsaw cutters correctly.

Top Plate File Angle

Correct angles for filing the top plate of the saw chain cutters.

Side Plate File Angle

Correct angles for filing the side plate of the saw chain cutters.

Maintaining Depth Gauge Clearance

How to check and maintain the depth gauge clearance for optimal cutting.

Maintaining the Guide Bar

Tips for cleaning, inspecting, and maintaining the guide bar for longevity.

Cleaning the Air Filter

Instructions for cleaning the chainsaw's air filter.

Cleaning the Starter Unit

How to clean the starter unit's cooling vents.

Adjusting the Carburettor

Steps for adjusting the carburetor, including idle speed adjustment.

Cleaning the Engine

Procedure for cleaning engine fins and flywheel fins.

Checking the Fuel Filter

How to check and replace the fuel filter.

Replacing the Spark Plug

Instructions for replacing the spark plug.

Inspecting;Cleaning the Spark Arrestor Screen

How to inspect and clean the spark arrestor screen in the muffler.

Inspecting and Cleaning the Chain Brake

How to clean and test the chain brake mechanism.

Storing the Product

Maintenance Schedule

Troubleshooting

Techtronic Industries Australia Pty Limited Guarantee

Ryobi RCS4246B Specifications