Ryobi RLT254CDSO - Replacing the Spark Plug

35
OPERATION
2
3
1
5
x3
4
1
2
3
2
1
2
x3
1
8
7
6
5. Use the brush to clean the exhaust hole of
the cylinder and intake hole of the mufer.
6. Loosen the screws securing the spark
arrestor, and then detach it from the mufer.
7. Clean the spark arrestor with a small wire
brush.
8. After cleaning, install the spark arrestor back
to the mufer. Attach the stamping plate and
outlet tube to the mufer cover and then