Ryobi RLT26C - Signal Words and Meanings

2
English (Original Instructions)
NAME EXPLANATION
Guaranteed sound power level is 108 dB.
Run position
Set the choke lever to “FULL” choke position.
Set the choke lever to “HALF” choke position.
Set the ignition switch to the “I” (ON) position.
Press the primer bulb 10 times.
Pull the starter grip to start.
Squeeze the throttle lock and throttle trigger to run.
Waiting time 10 seconds
To stop the engine, move the ignition switch to the “O” stop
position .
Keep hands away from blades.
EurAsian Conformity Mark
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result
in minor or moderate injury.
CAUTION (Without safety alert symbol) Indicates a situation that may result in property
damage.