PRODUCT SPECIFICATIONS
Mitre saw
Model RMS254DB
Net weight 17.7 kg
Blade diameter 254 mm
Arbor hole 30 mm
Blade teeth 48
Width of cut 2.8 mm
No-load speed 5500 min
-1
Input 220V - 240V ~ 50 Hz
Power 2000 W
Cutting capacity:
Mitre 0° x bevel 0° 340 mm x 80 mm
Mitre 0° x bevel 45° (L) 340 mm x 50 mm
Mitre 0° x bevel 45° (R) 340 mm x 25 mm
Mitre 45° x bevel 0° 240 mm x 80 mm
Mitre 45° x bevel 45° (L) 240 mm x 50 mm
Mitre 45° x bevel 45° (R) 240 mm x 25 mm
Minimum workpiece dimensions 130 mm x 35 mm x 2.5 mm
Measured values determined
according to EN 62841
A-weighted sound pressure level L
pA
= 99.10
dB(A)
Uncertainty K
3 dB
Measured values determined
according to EN 62841
A-weighted sound power level L
WA
= 110.28
dB(A)
Uncertainty K
3 dB
Replacement parts
Saw blade 089312001065
Kerf plate 089312001144
NOISE LEVEL
WARNING
The declared noise emission value(s) have been measured
in accordance with a standard test method of EN 62841-1
and EN 62841-3-9, and may be used for comparing one
tool with another.
The declared noise value(s) may also be used in a
preliminary assessment of exposure.
The noise emissions during actual use of the power tool
can differ from the declared values depending on the ways
in which the tool is used especially what kind of workpiece
is processed.
Identify safety measures to protect the operator based on
an estimation of exposure in the actual conditions of use
(taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is
running idle in addition to the trigger time).
Wear hearing protection. Exposure to noise can cause
hearing loss.
To Next Page
Loading...
