Ryobi RRT18 - Product Specifications; Battery and Charger Compatibility

WARNING! The declared vibration total values and the
declared noise emission values given in this instruction manual
have been measured in accordance with a standardised test
and may be used to compare one tool with another. They may
be used for a preliminary assessment of exposure.
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
may differ. These conditions may signicantly increase the
exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise
should take into account the times when the tool is turned off
or when it is running idle. These conditions may signicantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in case
of vibration), and organising work patterns.
PRODUCT SPECIFICATIONS
Rotary tool
Model RRT18
Voltage 18 V
Collet 3.2 mm (1/8“)
Cable length 120 cm
Maximum allowable overhang 14 mm
Maximum mandrel length 40 mm
Rated speed 4400 - 23000 min
-1
Weight - excluding battery pack 0.34 kg
Weight (According to EPTA procedure
01/2014)
0.76 kg (1.3Ah) -
1.53 kg (9.0Ah)
Measured sound values determined according to EN 60745:
A-weighted sound pressure level
L
pA
= 52.0 dB(A)
Uncertainty K 3 dB(A)
A-weighted sound power level
L
WA
= 63.0 dB(A)
Uncertainty K 3 dB(A)
Wear ear protectors;
The vibration total values (triax vector sum) determined according
to EN 60745:
Vibration emission value a
h
= 12.5 m/s
2
Uncertainty K 1.5 m/s
2
BATTERY AND CHARGER
Model Compatible battery
pack (not included)
Compatible charger
(not included)
Lithium-ion RB18L..
BCL1418..H
RC18..